Display magnetic frame
Easy and fast poster change
- For commercial posters, placards and more
- Quickest framing thanks to the unique magnetic frame principle
- Integrated clip mechanism to hold the poster in place
- One person alone can change the poster
- Standard formats or custom sizes up to 1400 x 2500 mm
- Individually made to measure in Germany
Easy framing
First the magnetic profile frame with plexiglas® is removed as a whole from the base element. The back side of base element is screwed to the wall with the HALBE BS 3 picture safety device.
Posterfix
The poster is inserted straight from below into the sprung Posterfix and stays fixed. "Sprung" so that the clamp can press underneath/against the pane.
Magnetic profile frame
Now the magnetic profile frame with plexiglas is placed on top again. To exchange the poster, simply remove the profile frame with plexiglas® – thanks to the magnetic tapes
Easy exchange of posters
For removal, the existing poster is slighted shifted to the side horizontally and then pulled under and out of the Posterfix.
- Plexiglas® can be exchanged when damaged
- Scratch-proof plexiglas® optional
- Dustproof, nothing gets inside
- Aluminum 12 or 14 profiles available
- Flush 45 degree mitre is almost invisible
- Glued in and PAT tested rigid foam board for proper flatness
- Fixed insertion depth of 0.25 millimetres
- Suitable for standard poster paper up to 300 gramm per square metre
- Custom sizes 210 x 210 mm up to 1400 x 2500 mm
For good business.
The HALBE Display magnetic frame – for perfection presentations of commercial posters and billboards in shops, restaurants (menus), cinemas, hotels, changing campaigns and commercial rooms with customer contact.
Shatterproof glass with UV protection
The frame is by default equipped with light shatterproof plexiglas® and is UV protected against ageing and changes in colour. If the plexiglas® is damaged it can easily be replaced. Scratchproof plexiglas® is possible on request.
quality characteristics
Product-Highlights
Magnetically simple
The profile frame is firmly attached to the plexiglas®. If needed, the plexiglas® can also be exchanged. This unit can be removed and put back on within seconds. The magnetic power keeps the frame safely and permanently connected to the base element.
Timeless design
The HALBE Display magnetic frame is available as Aluminum 12 or 14 – for larger quantities also with RAL colours.
1
2
3
Fit for every wall and store system
To safely screw the frame to the wall there are four hanging holes on the back. On request, the HALBE Display frame can be adapted to existing hanging or railing systems. Important note: Please mention your desired format (landscape or portrait) with your order so we can include the matching Posterfix clamping profile in the delivery.
Flatness and insertion depth
An even contact pressure on the glass ensures proper flatness of the poster on the PAT tested rigid foam board with PE coated paper. The fixed insertion depth is 0.25 mm and suitable for paper up to 300 grams per square metre.
4
5
6
Summary
- On request adaptable to hanging or railing systems
- By default with HALBE BS3 picture safety device for screwing to the wall
- Four felt pads as separators to prevent wall damage
- Large range of colours
- RAL colours possible with larger quantities
- Delivery with reclosable carton box for further transport
- 2013 awarded with the Red Dot Design Award
- For commercial posters and billboards
- Magnetic opening and closing without tools
- Fast and easy framing and exchanging on the display side
- Can be exchanged by one person, even large formats
- Posterfix clamping rail holds the poster when placing the top frame
- No tools necessary
- Base element stays screwed to the wall
- Even contact pressure of the glass
- Shatterproof plexiglas® with UV protection against changes in colour
- Glasfix system fixes plexiglas® in top frame
- Plexiglas® can be exchanged when damaged
- Scratch-proof plexiglas® optional
- Dustproof, nothing gets inside
- Aluminum 12 or 14 profiles available
- Flush 45 degree mitre is almost invisible
- Glued in and PAT tested rigid foam board for proper flatness
- Fixed insertion depth of 0.25 millimetres
- Suitable for standard poster paper up to 300 gramm per square metre
- Custom sizes 210 x 210 mm up to 1400 x 2500 mm
- On request adaptable to hanging or railing systems
- By default with HALBE BS3 picture safety device for screwing to the wall
- Four felt pads as separators to prevent wall damage
- Large range of colours
- RAL colours possible with larger quantities
- Delivery with reclosable carton box for further transport
- 2013 awarded with the Red Dot Design Award
- For commercial posters and billboards
- Magnetic opening and closing without tools
- Fast and easy framing and exchanging on the display side
- Can be exchanged by one person, even large formats
- Posterfix clamping rail holds the poster when placing the top frame
- No tools necessary
- Base element stays screwed to the wall
- Even contact pressure of the glass
- Shatterproof plexiglas® with UV protection against changes in colour
- Glasfix system fixes plexiglas® in top frame
Display-Magnetrahmen – die neue Art des Posterwechsels
Der Display-Magnetrahmen ermöglicht eine völlig neue Art des Posterwechsels. Durch sein an der Wand fixiertes Grundelement lässt sich der Rahmen kinderleicht öffnen und abnehmen, was den Ansprüchen von Ladenkonzepten besonders entgegenkommt. Der eigentliche Profilrahmen und die Abdeckung aus bruchsicherem Plexiglas werden durch das neue Glasfix-System als Einheit magnetisch auf die verankerte Rückwand gesetzt – ein Rahmen, der spielend Veränderung schafft. Auch großformatige Poster und Plakate können dank des speziell entwickelten Posterfix-Moduls durch einen cleveren Klemmmechanismus von nur einer Person mühelos und schnell getauscht werden. Der Display-Magnetrahmen ist der Rahmen für Liebhaber von wechselnden Ansichten.
Einfacher und cleverer Mechanismus
Der Display-Magnetrahmen eignet sich besonders für häufige Motivwechsel. Der Bilderrahmen muss nicht von der Wand genommen werden, Profilrahmen und Motiv müssen nicht umständlich gelöst werden. Dieses simple Verfahren erlaubt es, Motive sauber und knitterfrei mit dem Display-Magnetrahmen einzurahmen.
Plakate und Poster lassen sich fortan mühelos in vier Schritten austauschen:
- Der Profilrahmen und die Plexiglasscheibe lassen sich als Einheit abnehmen. Die Rückwand des Display-Magnetrahmens bleibt dabei fest an der Wand montiert.
- Das alte Motiv lässt sich einfach durch leichtes Verschieben aus dem Posterfix-Modul lösen, das am Grundrahmen fest montiert ist.
- Das neue Motiv wird von unten in das Posterfix-Modul eingeklemmt.
- Der Profilrahmen und die Plexiglasscheibe werden auf den Grundrahmen wieder aufgesetzt und durch Magnetkraft wieder fixiert.